#fuses LP          //Low power osc < 200 khz
#fuses XT          //Crystal osc <= 4mhz for PCM/PCH , 3mhz to 10 mhz for PCD
#fuses HS          //High speed Osc (> 4mhz for PCM/PCH) (>10mhz for PCD)
#fuses RC          //Resistor/Capacitor Osc with CLKOUT
#fuses NOWDT       //No Watch Dog Timer
#fuses WDT         //Watch Dog Timer
#fuses PUT         //Power Up Timer
#fuses NOPUT       //No Power Up Timer
#fuses NOBROWNOUT  //No brownout reset
#fuses BROWNOUT    //Reset when brownout detected
#fuses NOLVP       //No low voltage prgming, B3(PIC16) or B5(PIC18) used for I/O
#fuses LVP         //Low Voltage Programming on B3(PIC16) or B5(PIC18)
#fuses CPD         //Data EEPROM Code Protected
#fuses NOCPD       //No EE protection
#fuses WRT_1000    //Program Memory Write Protected from 0 to 0x0FFF
#fuses WRT_800     //Program Memory Write Protected from 0 to 0x7FF
#fuses WRT_100     //Program Memory Write Protected from 0 to 0x0FF
#fuses NOWRT       //Program memory not write protected
#fuses DEBUG       //Debug mode for use with ICD
#fuses NODEBUG     //No Debug mode for ICD
#fuses PROTECT     //Code protected from reads
#fuses NOPROTECT   //Code not protected from reading